If you see a red flashing light on your device, it’s a sign that there might be a short circuit somewhere. Don’t worry, though – you can easily get help by reaching out to [email protected] or visiting Puffco.com/warranty.
They’ll be able to provide you with the assistance you need to get your device back up and running smoothly.
Why is my Puffco red light flashing 3 times?
If you own a Puffco Peak, it’s important to pay attention to the LED lights to ensure it’s functioning properly. A red flashing light indicates a low battery level, while five flashing lights suggest a short circuit. If you see a solid red light, it’s likely overheating. By being mindful of these indicators, you can take the necessary steps to address any issues and keep your Puffco Peak in good condition.
Why is my Puffco light staying red?
If you find that your Peak Pro vaporizer is displaying a solid red light for 5 seconds and won’t allow you to start a heating cycle, it’s likely that your device is overheating. This can happen due to a variety of reasons, such as leaving the device in a warm environment like your car or garage, or using it for an extended period of time. It’s important to address this issue promptly to prevent any damage to your device and ensure that it continues to function properly.
Why is my Puffco Peak blinking colors?
If you’re seeing rainbow lights flashing on your device, don’t panic! This is actually a common issue that can be easily resolved. The rainbow lights typically indicate that there is a problem with the connection between the base and atomizer. This could be due to a loose connection or a dirty contact point. The good news is that this doesn’t necessarily mean that anything is broken or defective.
To fix the issue, try cleaning the contact points with a cotton swab and some rubbing alcohol. If that doesn’t work, try tightening the connections or replacing the atomizer. With a little troubleshooting, you should be able to get your device back up and running in no time!
What do the colors mean on Puffco?
After being fully charged, simply press the button once to switch between the four heat settings, each color-coded for easy identification — blue (450 degrees F), green (500 degrees), red (550 degrees), and white (600 degrees). To activate the heating element, double-click the same button.
What are the color codes for Puffco plus?
If you’re looking for a high-quality vaporizer battery, the Puffco Plus Battery is a great option to consider. One of its standout features is the ability to choose from three different temperature settings: low, medium, and high. This allows you to customize your vaping experience to your liking and get the most out of your concentrates. It’s important to note that the supercharger is not included with the battery, so you’ll need to purchase that separately if you don’t already have one.
Overall, the Puffco Plus Battery is a reliable and versatile choice for anyone who wants to enjoy their concentrates with ease.
Why is my Puffco Peak not working?
To ensure optimal performance of your device, it’s important to keep the heating chamber clean and the air path clear. Additionally, make sure the device is fully charged as a low battery can cause malfunctions or improper heating. If you continue to experience issues, don’t hesitate to reach out to Puffco’s customer support for further assistance.
How do I know if my Puffco atomizer is broken?
If you’re a vaper, you may have experienced some issues with your device. One common problem is the multicolored light flash, which indicates a poor or no connection between the base and atomizer. This can be frustrating, but it’s an easy fix. Another issue is the burnt flavor, which is a clear sign that your coil is on its last legs.
It’s important to replace your coil regularly to avoid this unpleasant taste and ensure a smooth vaping experience.
How do I reset my Puffco peak?
To reset your Puffco Peak, first turn it off by clicking the button five times. Then, hold down the button for 10 seconds until the LED light flashes rainbow colors. Release the button and wait for the light to turn off. Your Puffco Peak is now reset and ready to use.
It’s important to note that resetting your device will erase any custom temperature settings you may have programmed, so be sure to reprogram them if necessary.
Why is my Puffco Peak Pro blinking red and blue?
If you’re seeing the red-blue flashing response from your Peak Pro, it’s likely due to a chamber connection error. Don’t worry, though – there are steps you can take to fix it. First, try removing and cleaning the chamber from the device. You’ll want to submerge the chamber in 90%+ Isopropyl Alcohol for 20 minutes, but be sure to never use water – 99% ISO only! With a little bit of cleaning, your Peak Pro should be back up and running smoothly in no time.
How do I check my Puffco Peak battery?
The Peak device is designed with an intelligent temperature calibration feature that ensures a consistent experience every time you use it. This is particularly useful for those who use the device frequently. Additionally, the device has a battery life indicator that can be checked by clicking the button three times. The color of the indicator will show you how much battery life is remaining, so you can plan your usage accordingly.
Does Puffco warranty cover water damage?
In summary, it’s crucial to avoid any water from entering the bottom pocket of the glass. This is because there’s a high chance that it could seep into the electronics and cause harm to the device. It’s important to note that water damage is not covered by the warranty, so taking preventative measures is essential.
Can you use a Puffco while charging?
It’s important to mention that the Puffco Peak Pro has a convenient pass-through charging function that allows you to use the device while it’s charging. This is particularly useful for individuals who don’t want to wait for the device to fully charge before using it again. With this feature, you can continue to enjoy your vaping experience without any interruptions.
Can I clean my Puffco pen with alcohol?
Yes, you can clean your Puffco pen with alcohol. It is recommended to use isopropyl alcohol with a concentration of at least 90%. First, disassemble the pen and remove any remaining oil or residue. Then, soak the parts in the alcohol for about 30 minutes.
After soaking, use a cotton swab or brush to gently scrub away any remaining residue. Rinse the parts with water and let them dry completely before reassembling. It is important to note that you should never use bleach or other harsh chemicals to clean your Puffco pen as it can damage the device.
Can you put water in Puffco Peak?
According to Puffco, it is recommended to fill the bubbler just past the two air holes, and we concur with this advice. Overfilling the bubbler can result in water entering your mouth, which is not only unpleasant but can also harm the electronic base and atomizer. Therefore, it is crucial to fill the bubbler before attaching it to the base, ensuring that the water level is just above the two intake holes.
How do I fix my Puffco peak atomizer?
“`If you’re experiencing issues with your Puffco Peak atomizer, there are a few steps you can take to try and fix it. First, make sure the atomizer is properly attached to the base and that the connections are clean. If the atomizer is clogged, try cleaning it with a cotton swab and some rubbing alcohol. If the issue persists, you may need to replace the atomizer.
Puffco offers replacement atomizers for purchase on their website. It’s important to note that improper use or cleaning of the atomizer can cause damage and void the warranty, so be sure to follow the manufacturer’s instructions carefully.“`
What is the color setting on Puffco?
Color Settings. The Puffco Peak Pro has four preset temperature settings: Blue (450°F), Green (500°F), Orange (550°F), and Red (600°F). Each temperature setting corresponds to a specific range and is designed to provide optimal vaporization for different types of materials.
What color is the hottest setting on a Puffco?
If you’re looking to test out your new device, start by running a test session. To turn it on, simply click and hold the button for three seconds. You’ll know it’s on when it vibrates and the band light turns white. From there, you can click once to increase the temperature by one level.
Keep clicking until you reach the highest temperature, indicated by a white light. This will give you a good idea of how the device works and what temperature you prefer.
What does red and blue mean on Puffco?
If you notice that your Peak Pro is flashing red and blue, it could be an indication of a chamber connection error. To resolve this issue, the first step is to remove and clean the chamber from the device. You can do this by submerging the chamber in 90%+ Isopropyl Alcohol for 20 minutes. This will help to ensure that the chamber is clean and free from any debris that may be causing the connection error.
Once you have cleaned the chamber, reattach it to the device and see if the flashing has stopped. If the problem persists, you may need to contact customer support for further assistance.
What are the temp colors on Puffco pro?
The Puffco Peak Pro is equipped with four pre-set temperature options to cater to different preferences. The Blue setting is the lowest at 254 degrees Celsius or 492 Fahrenheit, while the Green setting is medium at 266 degrees Celsius or 510 degrees Fahrenheit. The Red setting is high at 277 Celsius or 530 Fahrenheit, and the White setting is the “Peak” option, which reaches the highest temperature at 285 Celsius or 545 degrees Fahrenheit. These temperature options allow users to customize their vaping experience and achieve their desired level of vapor production and flavor intensity.
Related Article
- Why Does My Protein Shake Foam?
- Why Does My Propane Heater Smell?
- Why Does My Pressure Washer Surge?
- Why Does My Popcorn Taste Stale?
- Why Does My Pool Taste Salty?
- Why Does My Pool Feel Slimy?
- Why Does My Polaroid Keep Flashing?
- Why Does My Polaroid Flash Red?
- Why Does My Photobooth Keep Freezing?
- Why Does My Phone Keep Updating?